Bypasses configuration

Bypasses enable to physically re-route network packages in case of a system failure.


Bypasses configuration is not available if Wheel Fudo PAM is running in virtualized environment.

  1. Select Settings > Network configuration.

  2. Select Bypasses tab.

  3. Select bypass mode.

    • Bypass mode permanently enabled - this option enforces bypass mode on the network interface card. This mode may be used for maintenance purposes or when troubleshooting network issues.
    • Bypass mode enabled only in case of system failure - network packets are re-routed only in case of a system failure or in case the Wheel Fudo PAM is powered off.
    • Bypass mode disabled - in case of system failure, the network packets will not be routed to the next network appliance.
  4. Click Save.

Related topics: