Date and time

System events registered by Wheel Fudo PAM (sessions, system log events, etc.) are timestamped. Wheel Fudo PAM can obtain the time information either from an NTP server or the system clock.

Warning

  • It is strongly advised for the date and time settings to be obtained from a reliable NTP server. Changing date and time settings manually may result in system malfunction.
  • Date and time synchronization with NTP server is required in cluster configurations.

Changing date and time settings

Note

Manual time setting is disabled if there are NTP servers configured.

To change the Wheel Fudo PAM’s system clock settings, proceed as follows.

  1. Select Settings > System.
  2. Change date and time parameters in the Date and time section.
../../_images/date_time_settings.png
  1. Click Save.

Time servers configuration

Note

NTP servers ensure that the system time on all IT infrastructure devices is synchronized. Using NTP servers guarantees that the timestamp of the recorded session matches the time settings on the monitored server.

Adding an NTP server definition

To add an NTP server definition, proceed as follows.

  1. Select Settings > System.
  2. Click i in the NTP servers section to add an NTP server.
  3. Enter NTP server IP address or host name.
../../_images/add_ntp.png
  1. Click Save.
  2. Select Restart from user menu to reboot Wheel Fudo PAM and apply new time settings.
../../_images/restart_trigger.png

Editing an NTP server definition

To edit an NTP server definition, proceed as follows.

  1. Select Settings > System.
  2. Find and change desired NTP server configuration parameters in the NTP servers section.
../../_images/edit_ntp.png
  1. Click Save.
  2. Select Restart from user menu to reboot Wheel Fudo PAM and apply new time settings.
../../_images/restart_trigger.png

Deleting an NTP server definition

To remove and NTP server definition, proceed as follows.

  1. Select Settings > System.
  2. Find desired NTP server definition in the NTP servers section and click i.
../../_images/remove_ntp.png
  1. Click Save.

Related topics: